Replacing The Cutting Unit - Fakir STUBBY Bedienungsanleitung

Replacing The cutting Unit

• If your cutters become damaged or worn, do not continue using the Trimmer. Replace
cutters immediately.
• Open the cutting unit.
• Remove the old cutting unit by pushing against the teeth of the cutting unit ( g. 11).
• Insert the notch of the new cutting unit into the guiding slot ( g. 13).
• Push the cutting unit back onto the Trimmer until you hear a 'click' ( g. 14).
WARNING!
• Never immerse the machine in water or rinse under
the tap. (Fig.15)
• Only the trimmer attachment can immerse in water or
rinse under the tap separate from machine (Fig.16)
STUBBY
23
GB