BEHA UNITEST Therm 100 Bedienungsanleitung Seite 19

Measurements in dangerous proximity of electrical in-
stallations are only to be executed when instructed by
a responsible electrical specialist, and never alone.
If the operator's safety is no longer ensured, the in-
strument is to be put out of service and protected
against use. The opening of the instrument for fuse re-
placement, for example, may only be carried out by
professionals
The safety is no longer insured, if the instrument:
- shows obvious damage
- does not carry out the desired measurements
- has been stored for too long under unfavourable con-
ditions
- has been subjected to mechanical stress during trans-
port
Avoid any heating up of the instrument by direct sun-
light to ensure perfect functioning and long instrument
life.
Appropriate Usage
The instrument may only be used under those condi-
tions and for those purposes for which it was con-
ceived. For this reason, in particular the safety refer-
ences, the technical data including environmental
conditions and the usage in dry environments must be
followed.
When modifying or changing the instrument, the op-
erational safety is no longer ensured.
Safety
19