Trust 16938 Bedienungsanleitung Seite 8

Canvas Widescreen Tablet – User's Manual
Pen Pad (Tablet properties):
This utility consists in 3 tabs (Pen, Mapping, ExpressKeys).
In each tab, the "Default" button allows you to restore the default settings, and the "About" button displays
information about the tablet and its driver.
Pen:
Tilt sensitivity
Tip feel
Click "Details" to obtain a graphic representation of this setting (
Click Threshold
Current pressure gauge
Pen Buttons settings
Tip Double Click Distance
(3 steps setting: Normal/medium/high)
How fast the tablet determines the pen's inclination/tilt.
(10 steps setting: from Soft to Firm)
How much pressure is needed for the pen to detect a change.
Soft= very few pressure required
Firm= lots of pressure required
(10 steps setting: from Low to High)
How "hard" the contact between the pen and the tablet needs to be for a click to
be detected
The higher this setting, the harder you need to press the pen against the tablet to
click.
Shows how hard you are currently pressing the pen against the tablet's surface.
Assign one of the following functions to one of the two pen buttons:
-
None (disable this button)
-
Left click
-
Left double click
-
Right click
-
Right double click
-
Scroll (pressing the button starts the Easyscroll mode. When the
cursor changes into a scrolling cursor, move the pen up/down to
scroll up/down through the document).
(5 steps setting: from Off to Large)
Sets the accuracy needed to double-click ("how much movement you are
allowed between the two clicks of a double click")
Off: the 2 clicks of a double click need to be almost at the same spot.
Large: you need to be less accurate for a double click to be detected.
6
) and a test sandbox ( : "Try here").