Finishing The Installation; Fan Speed Control - LUCCI BORDONO SERIES Handbuch

 After completing the electrical connection at the mounting
bracket terminal block, connect the ceiling fan wiring via the quick
connector plug.
Cover the mounting bracket with the canopy. Ensure all electrical

wiring is tucked inside the canopy and that they are not damaged
during this step. Secure the canopy to the hanger bracket using
the screws provided. Fig. 9

FAN SPEED CONTROL

Your ceiling fan is controlled via the fan speed pull chain switch.
To change speeds, pull the fan speed switch 4 times, and the
fan will start running at:
High speed --- Medium speed ---- Low speed--- Off
LIGHT ON/OFF CONTROL
Your ceiling fan is controlled via the light pull chain switch.
To turn on/off the light, pull the light switch.
USING YOUR FAN WITH REMOTE
IMPORTANT NOTE: The pull chain light switch must be set to the 'on' position and the pull chain fan
switch must be set on high speed when you are using your ceiling fan with a remote.
REVERSING SWITCH
Your ceiling can operate either summer or winter mode.
SUMMER Mode: The reverse switch shall be in the "down" (SUMMER) position to make the fan rotate
in an anticlockwise direction. The airflow will be directed downwards, for cooling in summer.
WINTER Mode: The reverse switch shall be in the "up" (WINTER) position to make the fan rotate in a
clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for
energy conservation in winter.

FINISHING THE INSTALLATION

USING YOUR CEILING FAN
8
Fig. 9
Fig. 12
Fig. 10