Cleaning
Always pull the power plug before undertaken maintenance work on the
device.
If lumps of earth or plants are stuck in the brush roller while working,
first turn off the device. Start the motor only for a moment. The block-
age will be cleared by the movement of the brush roller.
Should it be necessary to loosen the dirt by hand, first disconnect the
power cord for your safety.
Use a stiff brush and a dry cloth to clean the device; do not use
aggressive chemicals or abrasives for cleaning.
Do not allow liquids of any kind to enter the device.
Storing
Clean the device before storing it.
Before storing check all parts and the power cable for damages.
Store the device indoors in dry place that is protected from dust and dirt
and extreme temperatures.
Using
19