User Guide; Using The Videophone; Monitor Settings; Outside Station Settings - CFI EXTEL MOMBO Bedienungsanleitung

Important:
Connect directly to terminals 5 and 6 on the back of the outside station (no polarity to respect).
Note that this function is only valid if the screen is switched on. The image will be interrupted
control is used.
Important : The door opener or electronic lock you are about to install must be a low consumption device and
outside station.
Note that this function is only valid if the screen is switched on. The image will be interrupted
control is used.

6. USER GUIDE

a. Using the videophone
button to turn the monitor off.
The latch or lock is triggered when the
control is used.
b. Monitor settings
5 settings - accessible beneath the monitor:
LED adjustments (8) ON : back-lighting on OFF : back lighting off
Ring tone selection (9)
Ring tone volume setting (10)
Colour setting (11)
Brightness setting (12)
a. Outside station settings (fig. 3)
If you notice that the outside station camera lens is not correctly aligned when installing the monitor and outside
Caution, you can only compensate by a few centimetres in height.
GB4
key.
button is pressed.
button
CFI EXTEL MOMBO - 12/2014
button to talk.
interrupted when the