Tool Change - BDS Maschinen SKF 25 Originalbetriebsanleitung

Tool change

Turning the reversing plates
3
SKF 25
WARNING
Risk of injury!
► Do not use damaged, soiled or worn tools.
► Change tools only when the machine is switched off and at a
standstill. Pull the plug out of the mains socket.
► Only use tools, adapter and accessories that match the
machine.
1
Place the machine onto the upper side (power connecting
‹
cable ).
Remove the screw (2).
‹
Remove the housing (1).
‹
Remove the fixing screw (3), turn the reversing plate and
‹
tighten the fixing screw again.
Repeat the procedure for all reversing plates of the miller.
‹
Replace the housing again and tighten the screw (2).
‹
Tool change
2
41