Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Mounting; Operation - Europalms A4 Bedienungsanleitung

Led leuchttafel
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The maximum ambient temperature T
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

INSTALLATION

Mounting

The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
Before rigging make sure that the installation area can hold a minimum point load of 10 times the device's
weight.
Do only use appropriate screws and make sure that the screws are properly connected with the ground.

Operation

1. Connect the connection cable of the power-unit with the DC IN-socket. Plug the power-unit into your
outlet. After you connected the effect to the mains, the LED lightboard starts running.
2. Write on the board with the optionally available pen for LED lightboard (UV active white), No. 51931996.
3. You may now set the desired program and three different speeds on the LED lightboard via the two
buttons on the side of the device.
Program Selection:
1: Red, static
2: Red, blinking
3: Blue, static
4: Blue, blinking
5: Green, static
6: Green, blinking
7: Red + blue (magenta), static
8: Blue + green (cyan), static
9: Green + red (yellow), static
10: Red + green + blue (white), static
11: Red + green + blue (white), blinking
12: (Chaser) color changing red - blue - green
13: Off
must never be exceeded.
a
9/10
00047316.DOC, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

A2A3A1

Inhaltsverzeichnis