Allowing External Bluetooth Connections - Aquasound EMC50PRO-TW Bedienungsanleitung

Allowing external Bluetooth connections:

Bluetooth screen
Via the 'Bluetooth' button* on the home screen you
can allow external devices to connect with the N-Joy
Music System. Doing so will stop the playback of
music via the Controller. As long as you remain in
the screen shown to the right, you will be able to
connect external devices. Instruction for often used
device scan be found on the next pages.
* This button is disabled by default, but can be added to
the home screen via Settings
Disconnecting devices
For the proper functioning of the N-Joy Music
Center it is of utmost importance that external
Bluetooth devices are disconnected before you
leave the Bluetooth screen. To remind you of this, a
warning (see image) will be shown before you leave
the Bluetooth screen After leaving the Bluetooth
screen, the playing of music via the controller will be
resumed.
AUX-IN
Depending on the system purchased it may be possible to connect external devices via AUX-IN (cable
not included) with your system. When you wish to play music from this external source this is also
done via visiting the Bluetooth screen. When you visit the Bluetooth screen playback via the controller
will be stopped and the system will automatically switch to the sound from the AUX-IN.
Notes:
•
A Bluetooth connection will always take precedence over a device connected by AUX-IN.
•
When AUX-IN is connected, a Sound-Bar will never switch itself off.
Bluetooth.
31