First Time Setup Of The Controller - Aquasound EMC50PRO-TW Bedienungsanleitung

First time setup of the controller:

Welcome screen
When you start the controller for the first time it will
automatically load the welcome screen that will help
you to set up the controller for use. Select your
language from the list.
Wi-Fi Setup
The first step in the set-up process is connecting the
controller via Wi-Fi so the controller will be able to
access the internet and through that play internet
radio and download updates if they are available.
Scan for available Wi-Fi networks, then select your
Wi-Fi network and enter its passcode. You can also
test if the connection has been successful.
Bluetooth set-up
The next step is the connection of the controller to
the receiver, Sound-Bar or Speakers via Bluetooth.
Check if the device to be connected is turned on and
have the controller scan for this device. After the
scan, you press the 'Pair' button next to the correct
device. The Bluetooth name will vary depending on
the product you have purchased
Activation
The last step in setting up your controller is it's
activation. Insert the activation code* and your email
address to do this, this email address will only be
used to keep you informed on software updates for
your controller.
You will now be taken to the controller's home
screen. In this screen, you can use the various
functions of the N-Joy Music System. Set up is
complete.
* You will find the activation code on the front page of
This manual.
26