Memory Function; Error Codes - LaserLine LaserRange-Master T7 Bedienungsanleitung

Volume calculation:
1. Volume
measurement

Memory function:

The device has 30 storage locations.
1.
Exit memory
< record 01/30

Error codes:

204 Calculation error
208 Excess current (please contact your retailer)
220 Replace the battery
252 Temperature is too high
253 Temperature is too low
255 Received signal too weak or measuring time too long
256 Received signal too strong
251 Outside the measuring range
500 Hardware fault (If the symbol stays on after switching the device
off and on, please contact your retailer.)
16
EN
Addition or
subtraction selection
2.
or
+
8.425 m
––––– m
+
––––– m
2. Add volume
measurement
< record 01/30
or