Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Operating Instructions
4.7 Ironing with steam
1.
Before you start to steam iron, check if enough water is in the water tank. Refill
water in the tank if required. Ensure to disconnect the appliance from the mains. Let
the appliance cool down completely.
2.
Follow the steps previously mentioned in the chapter Dry ironing.
3. Set the temperature control knob between the position •• and •••. If the temperature
setting is too low, water may drip from the soleplate and no steam can be produced.
4. After the indicator light (7) switches off, press the steam trigger (1) for several times.
5.
After you finish ironing, turn the temperature control knob to the "min" position and
remove the plug from the main socket.
NOTE:
When using this function for the first time, press the steam trigger (1) several
times to pump water to the bottom of the soleplate.
6. Allow the appliance to cool down completely.
7.
Once the appliance has cooled down, pour out the remaining water via the inlet (3).
4.8 After usage
1.
Turn the appliance off after each use, as well as if you take a break.
2.
Turn the temperature control knob (9) to the "min" position and remove the plug (5)
from the mains socket.
3. Empty the water tank (4) via the inlet (3), if required.
English
35
Werbung
Kapitel
Inhaltsverzeichnis
