Box Contents - Denon Professional DN-506S Benutzerhandbuch

User Guide (English)
Introduction
The DN-506S is designed to meet your needs in multiple environments such as boardrooms,
classrooms, presentation facilities, and other installed applications. It is focused on delivering
pure sound reproduction, excellent for both speech and music.
The DN-506S delivers a wide-range frequency response by employing three extraordinary
drivers and unique crossover technology. It boasts a balanced low-mid frequency response
along with a defined mid and high frequency response. A dedicated mid-range driver provides
exceptional speech intelligibility—ideal for applications where vocal clarity is required.

Box Contents

DN-506S (1)
IEC power cable
User Guide
Safety & Warranty Manual
Non-slip pad
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denonpro.com.
Quick Setup
Connection Diagram
Items not listed under Introduction > Box Contents are sold separately.
The DN-506S loudspeakers feature balanced XLR and 1/4" connectors, as well as unbalanced
RCA-type analog inputs. Connect the outputs of your audio interface, monitor controller,
mixer, or other line-level device to these inputs.
Tip: If your mixer, interface, or other audio source features both XLR/TRS and RCA-type
outputs, use the XLR or TRS connectors instead of the RCA connectors whenever possible.
XLR and TRS cables incorporate a "balanced" design that carries a signal over three
conductors ("hot," "cold," and "ground") instead of two conductors as found in RCA cables
("hot," and "ground"). This results in lower noise, higher rejection of radio-frequency (RF)
interference, and better overall fidelity. If XLR/TRS jacks are unavailable, use RCA-style cables
but try to keep the cables as short as possible.
3