Technical Specifications; Trademarks And Licenses - Denon Professional DN-506S Benutzerhandbuch

Appendix (English)

Technical Specifications

Low-frequency driver
Mid-frequency driver
Tweeter
Frequency response
Crossover frequency
Low-frequency amplifier power
Mid-frequency amplifier power
High-frequency amplifier power
LF cutoff
LF boost cut
MF boost cut
HF boost cut
Polarity
Input impedance
Input sensitivity
Power
Protection
Cabinet
Power Requirements
Dimensions
(Width x Height x Depth)
Weight
Specifications are subject to change without notice.

Trademarks and Licenses

Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries.
All other product or company names are trademarks or registered trademarks of their
respective owners.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. (California law requires this warning to be given to customers in the State
of California.)
6.5" woven Kevlar low-frequency driver
5.25" woven Kevlar mid-frequency driver
1" silk dome tweeter with integrated waveguide
50 Hz - 20 kHz
Low-Mid: 400 Hz
Mid-High: 4 kHz
110 W
30 W
20 W
flat, 80 Hz, 100 Hz
+6 dB at 100 Hz
+6 dB at 1 kHz
+6 dB at 10 kHz
Positive signal at + input produces outward LF cone displacement
20 KΩ balanced, 10 KΩ unbalanced
85 mV pink noise input produces 90 dBA output SPL at 1 meter with
volume control at maximum
160 W
Output current limiting; over-temperature; transient on/off protection
to prevent loudspeaker "pops"; subsonic filter; external mains fuse
Metal grille and plastic front baffle with vinyl-laminated high-acoustic-
efficiency MDF
100-120V, 50/60 Hz; 220-240V, 50/60 Hz
10.6" x 15.4" x 11.2"
268 mm x 391 mm x 285 mm
23.4 Ibs./unit
10.6 kg/unit
California Proposition 65 Warning
23