Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY INSTRUCTIONS
A
Remove all packaging materials and the transport safeguards, if present. Keep packaging materials away from children – danger of
suffocation!
• Take the support tube out of the single box. (see Fig. A)
• Insert the axle through the holes in the wheel support (see Fig.B)
• Insert the big washer onto either end of the axle. (see Fig. C)
• Fix the wheel to the wheel support, using the provided spanner. (see Fig. D)
• Then fix cover of Wheel. (see Fig. E)
• Assemble the support protector by the supplied screws. (See Fig. F)
• Turn the motor section upside down then insert the wheel support into the corresponding holes in the bottom of motor box
(see Fig. G).
• The assembly is now finished.
DANGER! The appliance is absolutely FORBIDDEN to be used with the blade exposed and without the top section of the machine
fixed in place.
OPERATING INSTRUCTIONS
• Place the collection bag/basket directly under the ejection chute and attach it to the machine by fitting the loops onto the
hooks either side of the chute.
• Connect the machine's power cable to the mains electric. Before staring up, the machine's connection cable must be checked
for signs of damage and may only be used in a perfect condition.
• Switch on the machine using the power button on the rear of the machine.
• Without forcing gently feed the material to be shredded into the opening on the top of the machine.
• Larger sticks and branches will automatically be pulled in to the machine and shredded. Smaller lighter material may require
pushing in with the supplied plunger.
• At no point should your hands enter the machine.
• Soft material, like leaves, stems or grass can jam the inlet funnel. Always feed in the material to be shredded from the
right-hand side into the funnel.
• Check all the material you want to have shredded carefully. Make sure it does not contain any stones or nails, as this might
severely damage the shredder.
• Do not fill soft waste such as kitchen rubbish into the appliance but compost them.
• Once the collection bag has filled switch off the machine and empty it to prevent chippings backing up into the chute.
Warning! Always wait for the motor to stop running before switching it on again.
Warning! Longer material, that sticks out of the shredder, could lash out as soon as it is pulled in by the
B
C
F
D
G
E
Werbung
Inhaltsverzeichnis
