JBL PROAIR a50 Anleitung Seite 12

Technical data
Voltage/ frequency
Power input
Output
Head pressure
Diaphragm
Outlet
Aquarium
Installation (Fig. B):
1. Do not place the air pump on or above the aquarium, and select a location where it cannot fall into the water. It is saf-
est to hang the air pump on a dry wall near the aquarium.
2. Fix the air pump to a horizontal surface or a wall using the holding eyelet and the enclosed screw. Use a suitable
screw driver.
We urgently recommend the use of the enclosed JBL PROSILENT
3.
from flowing back into the appliance.
4. Cut an air hose of a suitable length and connect one end with the air connection of the air pump. Attach the other
end of the air hose to the air connection of an air stone or another air-operated article. Place the air stone or the air-
operated article in the aquarium. Avoid an excessively long air hose, since this can decrease the efficiency of the air
pump.
5. Connect the air pump to the power supply.
10
JBL PROAIR a50
®
220 - 240 V / 50 Hz
3W
50 l/h
>160 mbar
1
1
10-50 l
Safe non-return valve(s) in order to prevent water
®