Herunterladen Diese Seite drucken

Blaupunkt HSS501 Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
HSS501
1.
LED display
1a.
Temperature information
1b.
Key lock indicator
2.
On/off switch with temperature
setting
USING THE HAIR STRAIGHTENER
1.
Plug power cord into the mains. When you press the on/off button the temperature setting
changes gradually from 180 C, 200 C to 220 C. The subsequent press will switch off the device.
2.
Double quick pressing of the on/off button locks the switch. Key lock indicator will then
illuminate. In order to unlock on/off switch, press the on/off button twice quickly.
3.
The hair straightener heats up very fast. While heating up the selected temperature setting
blinks repeatedly on the display. When the desired temperature is reached, then the display
shows the temperature steadily. Usually, the selected temperature can be reached within one
minute approximately.
4.
Make sure the hair is clean, well combed and dry. Seperate hair into relatively small sections, not
wider than 2-4 cm.
Place a small hair section between the plates, starting from the roots. Clamp hair between the
plates and slide the straightener slowly down the entire hair strand, from root to tip. Repeat the
process if necessary until the desired look is achieved.
5.
WARNING! During hair straightening the steam may come from the appliance's working area.
This may occur while hair is wet or the hair was earlier treated with liquids or sprays like
hairspray.
6.
WARNING! After 60 minutes the straigtener automatically shuts off. In order to resume operation,
press the on/off buton and switch it on again.
7.
After finished usage turn the straightner off and unplug it.
8.
It is recommended not to comb or brush hair shortly after finished styling. When hair cools down
the styling effect will be stronger and long-lasting.
CLEANING AND MAINTENANCE
Regularly check and clean the straightener from the remaining hairs or any styling products. Wipe the
plates with a damp cloth and then wipe them with a dry cloth. Do not use any sharp cleaning utensils
for cleaning the plates. Never immerse the appliance in water or any other liquid.
3.
Floating tourmaline plates
4.
Travel lock
5.
Power cord
o
o
o
5

Werbung

loading