Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FOOD Measuring core temperature
•
Carefully insert the probe at least 2.5cm into the food. Make sure not to insert the sensor too close to a bone or into fat or gristle.
•
The core temperature is displayed on the display under FOOD after approx. 10 to 15 seconds.
Set the desired core temperature with the FOOD ˚ T button, press the SET button to display this value on the display under FOOD.
•
•
Activate the alarm by pressing the ALERT button. The alarm icon
•
When the food exceeds the previously set core temperature by 1 ˚ C or ˚ F, the alarm is triggered.
•
Press any button to stop the alarm.
•
The alarm icon continues flashing as long as the core temperature is above the previously set target temperature.
•
The alarm is triggered again in two minutes if the temperature does not sink below the target core temperature.
•
This process repeats until you turn off the alarm by pressing the ALERT button. The alarm icon
OVEN Measuring the grill/oven/cooking chamber temperature
•
Press the MODE button and choose the OVEN mode.
•
Place the probe inside the oven or carefully insert the probe at least 2.5cm into the food. Make sure not to insert the probe too close to a bone or into fat
or gristle.
•
Carefully close the oven door.
•
The grill/oven/cooking chamber temperature is displayed on the display under OVEN after approx. 10 to 15 seconds.
•
Set the desired temperature with the OVEN ˚ T button, press the SET button to display this value on the display under OVEN.
•
Activate the alarm by pressing the ALERT button. The alarm icon
When the oven exceeds the previously set core temperature by 1 ˚ C or ˚ F, the alarm is triggered.
•
•
Press any button to stop the alarm.
•
The alarm icon continues flashing as long as the temperature is above the previously set target temperature.
•
The alarm is triggered again in two minutes if the temperature does not sink below the target temperature.
•
This process repeats until you turn off the alarm by pressing the ALERT button. The alarm icon
TIMER Stopwatch / countdown
•
Press the MODE button and choose the TIMER mode. The timer icon
Stopwatch
•
Start the stopwatch by pressing the START / STOP button.
•
Press the same button to stop/pause the timer.
•
Reset the timer to 0 by pressing the HR and MIN buttons at the same time.
Countdown
•
Set the desired cooking time with the HR and MIN buttons. Reset the timer to 0 by pressing the HR and MIN buttons at the same time.
•
Press the START / STOP button to start the countdown. The countdown icon
•
As soon as 0:00
is reached, an alarm beeps 3 times per second and the display flashes for 20 seconds.
00
•
Press any button to stop the alarm.
•
Press the START / STOP button to stop the countdown.
•
If you do not stop the timer, the time continues counting down and
max. 9:5959. As soon as the maximum extra time is reached, an alarm beeps 4 times per second and the display flashes for 20 seconds. The timer then
automatically resets to 0:00
Cleaning
1. Let all parts of the grill thermometer cool down fully.
2. Wipe down the device with a slightly damp cloth. Make sure that no water can get into the device interior.
3. Clean the probe and the cable after each use with warm water and a little detergent.
Technical data
Name:
Dual Sensor Grill Thermometer
Art. no.:
8346
Housing dimensions: approx. 6.5 x 2.7 x 10cm (W x D x H)
Cable:
approx. 100cm long, heat-resistant to max. 380 ˚ C
Probe:
one probe,
two sensors (core temperature and cooking chamber)
Measurement range: 0 ˚ C to 300 ˚ C
Battery:
2 x 1.5V AAA, not included
Service
This product was carefully manufactured and packaged. If you
nevertheless have a complaint, our employees are more than
happy to assist. Send questions related to service to the e-mail
address indicated below (distributor).
Subject to technical modifications and typographical errors.
Distributor
tepro Garten GmbH
Carl-Zeiss-Straße 8/4
D-63322 Rödermark
Email: info@tepro-gmbh.de oder
backoffice@tepro-gmbh.de
Web: www.tepro-gmbh.de
P180011_TEPRO_8346_DualSensorGrillThermometer_DE_GB_20180322.indd 4
.
00
appears on the display.
disappears from the display.
appears on the display.
disappears from the display.
appears on the display.
flashes on the display under TIMER.
and
flash on the display. The extra time is shown on the display and runs to
Disposal
The packaging is made from environmentally friendly materials,
which you can dispose of at your local recycling points.
Do not under any circumstance dispose of the digital grilling and
roasting thermometer in normal household waste! Dispose of it
at an approved disposal facility or at your community disposal
facility. Respect the currently valid regulations. If in doubt, get in
touch with your disposal facility.
Batteries and accumulators
Do not dispose of batteries in household waste. Every consumer
is legally required to dispose of batteries at the local recycling
point of their community/city district or at the shop. This ensures
environmentally friendly disposal.
Batteries containing dangerous substances are labelled with the
chemical symbols Cd for cadmium, Hg for mercury and Pb for
lead. Batteries are labelled with the aforementioned symbols.
CE Supplementary Statement
When the product is in high Radio-frequency electromagnetic field,
the reading maybe show distortion, leave the high Radio-frequency
electromagnetic field environment, it will be restored normal.
22/3/2018 1:13 PM
Werbung
