Timer Mode - DELTA DORE TYPHONE 2 SV Bedienungsanleitung

5
ON/OFF MODE
- When the wrong
code is entered, a
"Wrong code"
message is heard.
The device hangs up after
three unsuccessful attempts
at entering the code.
- TYPHONE 2 SV automatically hangs up after 35 sec. if no button is pressed
- You have up to 3 minutes to complete the sequence
- Press keys only when voice synthesiser is silent.

TIMER MODE

6
Dial subscriber
number
Select control
1 or 2
or hang up!
7
TYPHONE 2 SV AND ANSWERING MACHINE
ON SHARED LINE
To give priority to TYPHONE 2 SV over the answering machine :
➊ Dial your telephone number, let it ring once, then hang up and wait at least 10 sec.
➋ Dial again within a minute. TYPHONE 2 SV will automatically connect before the
answering machine (phone rings once)
8
USING THE MANUAL CONTROLS
You can activate controls manually by using the 2 keys on the TYPHONE 2 SV.
Press keys 1 or 2 briefly to turn control 1 or 2 on or off (LED on or off).
9
OVERRIDING TYPHONE 2 SV
If TYPHONE 2 SV has connected before you can answer a call, press
and take the incoming call.
Phone
rings
(6 to 7 times)
Dial subscriber
number
Select control
1 or 2
or hang up !
(settings : from 1 to 255 hours)
Phone
Hello !
rings
(6 or 7 times)
Control n°1
is turned off
1
(example)
Press the control
number required
(e.g. control n°1)
Select another control
- 13 -
No code
Hello !
Code
TYPHONE 2 SV
entry
connects
Control n°1
1
is turned off
(example)
Press the control
number required
(e.g. control n°1)
Select another control
No code
Pin-in
Code
1
your access
entry
code
Pin-in your
4-digit code
4 8
Press , enter the number
of hours required (e.g. 48hrs),
then press to validate
Pin-in
secret 1 2 3 4
code
Pin-in your
4-digit code
Control n°1
is turned on
Press
to modify
2 3 4
Control n°1
is on timer
then to override