Cleaning And Maintenance; Troubleshooting; Disposal At End Of Life - Imetec P4201 Bedienungsanleitung

• Press the button gently to use the appliance at speed setting 1.
• Press the button fully to use the appliance at speed setting 2.
• At the end of the process, release the button and wait for the blades to come to a complete stop.
• Remove the plug from the power socket.
• Clean any parts that come into contact with foodstuffs immediately as described in the chapter
'Cleaning and care'.
• Wash the removable parts - lid, blades and bowl - by hand or in the dishwasher at a temperature not
exceeding 60°C.
• Wipe the motor unit with a dampened and thoroughly squeezed out sponge.
• Dry with a dry cloth.
Should one of the problems indicated occur, adopt the proposed solution:
Problems
The food is not evenly chopped
The packaging of the appliance is made of recyclable materials. Dispose of it in accordance with
the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the
crossed bin symbol on the appliance or its packaging indicates that the appliance must be disposed
of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical and
electronic equipment. Alternatively, instead of handling the disposal, the user can hand over the
appliance to the retailer when a new, equivalent one is purchased. The user can hand over electronic
products measuring less than 25 cm to retailers of electronic products having a sales area of at least
400 m² free of charge and with no obligation to buy. Appropriate separate collection for the subsequent
procedure for the decommissioned appliance for recycling, which includes treatment and environmentally
friendly disposal helps prevent adverse effects on the environment and health and promotes reusing
and/or recycling materials that the appliance consists of.

CLEANING AND MAINTENANCE

TROUBLESHOOTING

DISPOSAL AT END OF LIFE

Solutions
Chop the food in pulses.
Switch the appliance off, remove the motor unit and
the lid and mix the ingredients with a spatula. Close
and continue processing.
The bowl has been overfilled. Remove the excess
ingredients and continue processing.
EN
13