Charging Your Speaker - FRIEQ BTS-12 Gebrauchsanweisung

SPEAKER OVERVIEW: BACK

CHARGING YOUR SPEAKER

 Before your first use, or when the battery runs out, please charge the speaker
with the Micro USB charging cable included in the package.
 Plug the small Micro USB pin into the charging port on the back of the
speaker, and insert the other end of the cable (the standard USB 2.0 plug)
into the USB port of a computer or a USB main charger purchased from the
store (note: the charger must be designed and tested compatible with this
speaker if you purchased one). In this case, please plug the USB charger into
an wall outlet.
Using a third-party charger could result in electric shock and could also
damage the speaker.
 The LED indicator light will turn red when it is being charged. When it is fully
charged, the LED indicator light will go off. A full charge takes about 5-6 hours.
 The speaker can be charged while working. The speaker will be powered by
the DC input directly and the battery will be in sleep mode after it is fully
charged.
2