INNOCIGS EVIC PRIMO FIT – SELECTING & OPERATING THE MENUS
Note:
1. This function should only be used at room temperature, to ensure that the correct "base resistance" is locked
2. If you accidentally use a conventional coil or coils with a resistance greater than 1.5 ohms in TC-Ni, TC-Ti,
TC-SS316 or TCR (M1, M2, M3) modes, the device will automatically switch to VW Mode.
• Select POWER to adjust the output power in the temperature-controlled modes TC/TCR within a range of 1 to
80 watts.
Note: In temperature controlled modes, the device will adjust the output power automatically depending on the
selected temperature. The value you set determines, which power the device starts to fire with. It is a kind of preheat
function as well.
• Select STEALTH to specify, whether the screen is activated or deactivated while vaping. Choose "ON" to activate
or "OFF" to deactivate" the screen.
67