Bauknecht GMI 61102 IN Kurzanleitung Seite 15

WHAT TO DO IF...
If a fault occurs, before contacting our After-Sales Service, check the following troubleshooting guide to try
and remedy the problem (*see also the corresponding chapter in the user instructions).
Problem Cause
The appliance is not
• No water supply.
working
• The appliance doesn't fill with
• There is a power failure.
If dishes are not • Insufficient rinse aid.
perfectly dry
• Residual water in cavities.
If dishes are not • The water spray does not reach the
perfectly clean
• Insufficient detergent.
• Unsuitable programme selected.
• Spray arms blocked.
• Spray arm nozzles clogged.
• Incorrect detergent/detergent too
Sandy or grainy • Clogged filters.
residues
• Filters incorrectly installed.
Colour of plastic • Tomato/Carrot juice...
parts faded
All manuals and user guides at all-guides.com
enough water.
dishes.
old.
D GB
Remedy
• Turn on the water tap.
• Clean the filter in the water supply
tap.
• Ensure the inlet water hose is not
kinked.
• Insert the plug into the mains
socket.
• Open the door.
• Close the door.
• Check the domestic circuit fuse.
• Increase dispenser setting *.
• Load dishes tilted at an angle.
• Arrange dishes so that items do not
touch each other.
Load dishes upside down.
• Use the quantity of detergent
recommended by the manufacturer.
• Select a more intense wash cycle.
• The spray arms must be able to turn
freely.
• Remove any particles obstructing
the water flow *.
• Use a good quality detergent.
• Check filters regularly/clean if
necessary *.
• Refit and lock the filters in place,
making sure they have been inserted
correctly *.
• Depending on the material, if
necessary use a detergent with a
greater whitening power.
GB