Moulinex LM800 Bedienungsanleitung Seite 9

RECIPE
Carrot soup with cumin:
Ingredients:
- 700 g carrots, cut into cube of 15 mm x15 mm
- 800 ml of water
- 1 teaspoon cumin
- Salt and pepper
Put the carrot pieces in the glass jar and add the water. Mix in max
for 5 seconds. Turn off the appliance. Pour the mixture into a saucepan, add
the cumin and cook for about 30 min. You can add water during cooking for a
thinner soup. Salt and pepper according your taste.
CLEANING
• Unplug the appliance and remove the blender jug.
• The blades are extremely sharp; handle them with caution.
(A)
• To clean the motor unit , use a moist cloth. Dry it carefully.
• Never immerse the motor unit (A)
put it under running water.
• For easy cleaning, be sure to wash the removable parts in warm water and
washing up liquid immediately after use.
(E)
• The blender jug can be washed in the dishwasher using the
QUICK WASH
or programme.
• To clean the blender jug (E) easily, unlock the blade unit
through a quarter turn in the clockwise direction. Remove the gasket seal
(e2)
and clean all an parts under running water or in the dishwasher.
"
in water or any other liquid and do not
ECONOMY
(c1) by rotating it
12
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
"
speed
Appliance does not
work
The appliance stopped
while in use
Excessive vibrations
Leak from the lid
Leak at the bottom of
the blender jug
The blade does not
turn easily
CAUSES SOLUTIONS
Connect the appliance
to a socket with the
The plug is not
same voltage as that on
connected
the rating plate of the
Check that the blender
The blender jug is not
jug is positioned properly
positioned correctly on
on the motor unit as
the motor unit
explained in the leaflet.
Follow the instructions in
Overload
The product is not pla- Place the appliance on
ced on a flat surface a flat surface.
Volume of ingredients is Reduce the quantity of
too high ingredients processed.
Volume of ingredients is Reduce the quantity of
too high ingredients processed.
The lid is not correctly Place the lid correctly on
positioned the blender jug.
The blender jug gasket Reposition the gasket
seal (e2) is not positioned seal and lock the blade
correctly or is absent holder correctly.
Replace the gasket seal
Pieces of food too large
with a new one.
or too hard
Reduce the size or
Liquid has been blended
quantity of ingredients
that was too hot and
distorted the gasket seal
13
appliance.
§ First use.
processed.
dd liquid.