Aqua Medic angel LED 200 Bedienungsanleitung Seite 25

Indicating lamp turns off after 3 seconds
Lamp is working under "connect directly to light" mode. (When power is turned on, the indicator
light will be off a few seconds, indicating that WiFi is working under the "connect to light" mode).
Indicating lamp flashes twice then turns off
WiFi working under the router mode and waiting for configuration status. (When WiFi is in network
mode, but the indicator light is not on, the light needs manual setting to connect light to router).
Indicating lamp flashes three times then turns off
WiFi working under network mode, error occurred while connecting to the home router, which may
be a password error or router is turned off.
Indicating lamp continuous flashing
Transmitting data.
Indicating lamp off
No transmitting data.
Indicating lamp keeps on
Normal operation.
Connection
Download APP
• lOS Operating System 9.3.1 or above is recommended.
• lOS device opens "Apple store". Search for and download the "Aqua Medic" App.
• Android device opens "Google Play". Search for and download the "Aqua Medic" App.
Connect Light Directly
1. Make sure the light is connected to wall outlet through power adapter.
2. Exit the App and access phone "Setting" WiFi to connect angel LED 200 WiFi SSID (default
password: 12345678), (picture 1) .
3. Select Wi-Fi SSID: Aqua Medic-XXXX to link. Make sure there is a WiFi fan signal at top right
corner.
4. Go back to App, press Search icon to find light (picture 2).
5. Press" 192.168.0.XX-AE200XXXX" to select light (picture 3).
6. Finish above operations, press "Next" to program.
Picture 1 Picture 2 Picture 3
25