Adjusting The Time; Using The Chronograph - TW Steel GOLIATH Anleitung

USE OF THE CROWN
To adjust the time, set the date, or use the
chronograph, pull the crown out to the 1st or 2nd
position. After adjusting, push the crown back to its
normal position.

ADJUSTING THE TIME

Pull the crown out to the 2nd click position. If you have
a chronograph movement the second hand stops at (0)
position. Turn the crown to set the hour and minute hands.
ADJUSTING THE DATE
Pull the crown out to the 1st position. Turn the crown anti-
clockwise to set the date. After the date has been set, push
the crown back to the normal position.

USING THE CHRONOGRAPH

The chronograph is able to measure and display the time in 1/1
second united up to an maximum of 1 hour. The chronograph can be
started and stopped each time button A is pressed. Pressing button
B resets the chronograph. All hands return to their (0) position. If
the chronograph second hand does not return to the (0) second
position after the chronograph has been reset or after replacing the
battery, you should do the following: Pull the crown out to the 2nd
position. Press button A to set the chronograph second hand to
the (0) position. The chronograph hands can be advanced rapidly
by continuously pressing button A. Once the chronograph second
hand has returned to the (0) position, return the crown to its normal
position.
Hour hand
Chronograph minute
hand
Chronograph second
hand
Second hand
Date
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED
(0) position
Button A
Minute hand
24-hour hand
Crown / normal
crown position
Button B