Ec Declaration Of Incorporation - SCHUNK KSG 100 Montage- Und Betriebsanleitung

_________________________________________________________________________________________

14 EC declaration of incorporation

In terms of the EC Machinery Directive 2006/42/EC, Annex II, Part B
Manufacturer/
Distributor
We hereby declare that the following product:
Product designation:
ID-Number:
meets the applicable basic requirements of the Machinery Directive (2006/42/EC).
The incomplete machine may not be put into operation until conformity of the machine into which
the incomplete machine is to be installed with the provisions of the Machinery Directive
(2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2011-03
EN 62079:2001
The manufacturer agrees to forward on demand the special technical documents for the
incomplete machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the incomplete
machine have been created.
Person responsible for documentation: Mr. Alexander Koch,
Adress: see adress of the manufacturer
Mengen, Oktober 2018
H.-D. Schunk GmbH & Co.
Spanntechnik KG
Lothringer Strasse 23
D-88512 Mengen
Tel.: +49-7572-7614-0
Fax: +49-7572-7614-1099
info@de.schunk.com
schunk.com
schunk.com
H.-D. SCHUNK GmbH & Co.
Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
Single vice, hydraulic
KSG-H 125, KSG-H 160
0430312, 0430317, 0340318
Safety of machinery - General principles for design - Risk
assessment and risk reduction
Preparation of instructions - Structuring, content and
presentation
XND.00005.022_A – 10/2018
i.V. Alexander Koch; Director for Development / Design
Montage / Kontrolle
Installation / Check
Datum:
Signatur:
48