Declaration Of Conformity; First Use - Soehnle BARI Bedienungsanleitung

• It cannot be completely ruled out
that some paints, plastics or furni-
ture care products may attack and
soften the material of the anti-slip
feet. If necessary, place a non-slip
surface under the device.
• Do not place the unit directly under
a shelf or wall cabinet. The water
mist could damage them. Maintain
a minimum distance of 25 cm.
• Do not transport the unit with a full
water tank.

Declaration of Conformity

Leifheit hereby declares that
this device complies with the essential
requirements and other relevant pro-
visions of Directive 2014/35/EU. The
plug-in power supply unit complies
with the general requirements of DIN
EN 60335-1:2010.
Disposal of electrical and
electronic equipment EC
Directive 2012/19/EU
This product should not be treated
as normal household waste, but
should be disposed of at a collection
point for the recycling of electrical
and electronic equipment. You can
find further information about your
municipality, communal disposal
businesses or the company from
which you bought the product.

First use

(see Figures 1.1 - 1.6)
Fill the device only when the plug-in
power supply unit is disconnected!
1.1 Position on a level surface.
1.2 Remove the upper part.
1.3 Fill distilled water up to the maxi-
mum mark (80 ml).
1.4 Add two drops of Soehnle
fragrance oil. Fit the upper part
exactly.
1.5 Connect the power supply unit.
1.6 Switch on.
Scenting
By pressing the "SCENT" (
you can switch the two scenting
functions of the Soehnle Aroma-Dif-
fuser Bari on or off.
1. Press the "SCENT" button once
to activate the constant scenting
mode. The green LED on "CONT. "
lights up.
2. The second time you press the
"SCENT" button, the scenting
mode interval is activated (scenting
takes place in 10-second intervals).
Yellow LED lights up on "10 SEC"
3. Press the "SCENT" button again to
deactivate the scenting mode. No
LED lights illuminate.
Light
By pressing the "LIGHT" (
you can switch the two lighting func-
tions of the Soehnle Aroma-Diffuser
Bari on or off.
1. Press the "LIGHT" button once to
activate the pulsating lighting.
2. The second time the "LIGHT"
button is pressed the constant
lighting is activated.
GB
) button,
A
) button,
B
7