Connecting To A Wired Network (Optional) - Schaub Lorenz 26LE4800CT Bedienungsanleitung

Connecting to a Wired Network (optional)

For connecting to a wired LAN network, you should perform the following steps:
• Connect broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem.
• Ensure that Nero Media Home software is installed to your PC.(for DLNA function)
• Afterwards, you should connect your PC to the one of your modem's LAN connectors (e.g. LAN 1) by using
a proper LAN cable.
• Use another LAN output of your modem (e.g. LAN 2) to enable the connection to your TV. You can add
your TV to your LAN by connecting the LAN port at the rear of your TV to your modem's LAN connector as
illustrated below.
• You might be able to connect your TV to your LAN network depending on your network's con guration. In
such a case, use an ethernet cable to connect your TV directly to the network wall outlet.
English - 62 -