Led Indication; Frequently Asked Questions - PureLink CSW310 Benutzerhandbuch

5. LED INDICATION

There are LEDs and a UI for indication of system operation. For more detail, please check the table
below:
Condition
Power on
Mode
(Press the button)
No connection
Connection & Play

6. FREQUENTLY ASKED QUESTIONS

1. When there is no picture presented:
Make sure the direct connection from the source device to the sink device works properly. Check,
if all connectors are connected well; check if all cables can support the transmission speed. High
Speed HDMI cables from PureLink are recommended. Unplug the power cable to restart CSW310.
2. When there is no sound:
First, try to adjust the volume of the connected sink device (TV). Check cable connection to see
if it works properly. Check cable to see if it supports video transmission only (DVI) or not. The
HDCP encryption may not match very well at first connection; please unplug the power cable to
restart CSW310.
3. When there is no 3D effect (Only for 3D hardware):
Make sure the 3D function of the 3D sink device is activated (set to AUTO or 3D ON). Make sure
the 3D function of the 3D source device is activated (set to AUTO or 3D ON). Make sure that the
power of the shutter glasses (if active 3D) is on. Check the power of CSW310. Make sure, you use
the right glasses for the 3D technology in use (active or passive).
4. If the image is unstable or a snowing image shows on screen:
You might get interference form other wireless devices or heavy voltage sources inside the room
(ex. WiFi Router, Microwave, air conditioner). Please keep CSW310 away from those sources of
interference. The wireless transmission distance may be too far or blocked by a wall or another
object. Please place CSW310 in another location where you can get good signal and video
quality. Please change the direction of transmitter and receiver to get a better connection.
-05-
TX RX
Solid RED Solid RED
RED Flashing Solid Blue
Blue Flashing Solid Blue
Solid Blue Solid Blue
RX UI(TV Screen)
Startup image
Connection through pairing
Scanning
Video
ENGLISH