Options - AEG FSS5360XZ Benutzerinformation

While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
(if applicable).

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
3. Press
4. Press the on/off button to confirm
and
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
every cycle.
In other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeSaver and vice versa.
How to activate XtraDry
Press
on.
hold simultaneously
the indicators ,
start to flash and the display is blank.
.
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting: = AirDry activated.
to change the setting:
= AirDry deactivated.
the setting.
and need not to be selected at
. The related indicator comes
ENGLISH 11
and until
, and
, and go
continues to