Cameo CLPFLAT1TRI3WIR Bedienungsanleitung Seite 10

OPERATION:
COLOUR CHANGE
Press the MODE button repeatedly until "JU00" appears on the
display. Now the light is in colour change mode. Afterwards, press
ENTER and then use the UP and DOWN buttons to choose the 7
colours function "JU00" or stroboscope "JF00". To set the colour-
change and stroboscope rate (00 - 99), press ENTER again (all 4
digits on the display flash) and then use the UP and DOWN buttons
to change the values. Press ENTER again to confirm.
NOTE: Both functions can also be used simultaneously.
7 COLOURS
Rate 00 - 99
STROBE
Rate 00 - 99
COLOUR BLENDING
Press the MODE button repeatedly until "FA00" appears on the display.
Now the light is in colour blending mode. Afterwards, press ENTER
and then use the UP and DOWN buttons to choose the 7 colours
function "FA00" or stroboscope "FF00". To set the colour-blending and
stroboscope rate (00 - 99), press ENTER again (all 4 digits on the display
flash) and then use the UP and DOWN buttons to change the values. Press
ENTER again to confirm.
NOTE: Both functions can also be used simultaneously.
7 COLOURS
Rate 00 - 99
STROBE
Rate 00 - 99
10