Using The Bluematic - perfect pro BLUEMATIC Bedienungsanleitung

Note: The last device is stored before the BlueMatic goes into standby mode by pressing the Standby
button. If the power is interrupted by sliding the Power switch to the off position before press and
hold the Standby button, the last device will not be stored and repairing may be necessary in the next
operation.

USING THE BLUEMATIC

1. Turn on the Bluetooth of the mobile phone first.
2. Slide the POWER switch of the BlueMatic to the ON position, then press and hold the Standby
button for 2 seconds to turn on the BlueMatic.
3. After the BlueMatic is turned on, it will search for the last paired device and pair with it
automatically with the highest priority. If the last device cannot be found in 10 seconds, it will keep
staying in the discoverable mode and waiting for pairing by another Bluetooth device.
4. When pairing is successful, the Blue LED will light up steadily.
5. Turn on the audio amplifier and switch it to AUX mode. Adjust the volume of the amplifier to an
appropriate level.
6. Start playing music in your mobile phone. Use the Play/Pause/FF/FB controls of the media player
in your mobile phone to control playback.
7. Adjusting the volume control on the mobile phone `will also change the volume level. It is
recommended to set the volume of the mobile phone to almost max for better sound quality and
signal to noise ratio.
8. To switch the BlueMatic to standby mode, press and hold the Standby button. The Blue LED will
go off.
GB
G B
8