perfect pro BLUEMATIC Bedienungsanleitung Seite 8

USING THE BLUEMATIC FOR THE FIRST TIME
The BlueMatic can receive audio streaming from another Bluetooth device and pass the audio signal
to an amplifier. It supports Bluetooth devices such as a mobile phone, a PC or a Bluetooth device that
supports Bluetooth A2DP and AVRCP features.
Before using this feature, it should be first connected to the input of an audio amplifier and paired to a
Bluetooth device as the source of audio streaming.
Connecting to an audio amplifier
1. Switch off the BlueMatic and set the audio amplifier to standby mode before connecting the audio
cable.
2. Connect the LINE OUT of the BlueMatic to the AUX IN of an audio amplifier with the audio cable
supplied. Use a suitable adapter or other cable with appropriate terminals if the cable supplied
does not match the AUX in jack of the amplifier.
Pairing with a mobile phone
1. Slide the POWER switch to the ON position first. Then press and hold the Standby button for 2
seconds to turn on the BlueMatic. If it has never been connected to any Bluetooth device before,
it will enter the "discoverable mode" automatically and the blue LED will flash continuously. The
name "PP BlueMatic" will appear in the Bluetooth set up screen of the mobile phone. Click the
name to proceed pairing the mobile phone with the BlueMatic.
2. Once the BlueMatic has established connection with a mobile phone, the Blue LED will light up
steadily.
3. After the initial pairing, the BlueMatic will remember and automatically pair again with the last
device when it is switch on again.
7