Setting The Control Box; Warranty; Disposal - Waeco Switch200VTO Montageanleitung Und Bedienungsanleitung

Setting the control box

7 Setting the control box
Switch200VTO must be adapted to certain connection options. Use a dip switch
(fig. 5 6, page 5) to do this.
The dip switch is designed for setting the mirror function and for switching the connected
cameras between long-distance and close-up, provided this function is supported by the
selected cameras: dip switch 1 and 3 set camera 1, dip switch 2 and 4 set camera 2.
➤ Set the dip switches according to the following table:
DIP switch
1 3
OFF OFF
ON OFF
OFF ON
8

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please send the following items:
 Defect components
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
9

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
If you wish to finally dispose of the product, ask your local recycling centre or
M
specialist dealer for details about how to do this in accordance with the appli-
cable disposal regulations.
24
Camera 1
Function
Mirrored
Normal/close-up
Long-distance
PerfectView SWITCH200VTO
DIP switch
2 4
OFF OFF
ON OFF
OFF ON
Camera 2
Function
Mirrored
Normal/close-up
Long-distance
EN