MENSA HEATING Vireoo Privat Bedienungsanleitung Seite 53

Install the tabletop with four screws. Turn then
Vireoo-table correctly and reconnect power.
You are now ready to enjoy your new Mensa
Heating product.
* Applies only to Vireoo - Professional
2
Place the table leg standing on the top bracket,
so that the top bracket is facing the ground/
floor. Remove the transport protection by
loosening the the two screws. Route the cord
through the leg and pull it up so that it fits the
table leg. Make sure the cord is positioned cor-
rectly, so that it is located directly next to the
hole in the foot. Fasten the foot with the two
screws.
* Attach also the 4 screws in the serial
connectors
3
UK