MAXXTER ACT-WNP-RP-002 Benutzerhandbuch Seite 22

10. When I press "Site Survey" nothing is happening or the list of found networks is not
complete or stays empty.
Wifi networks only send out their name (beacon) every 100 milliseconds. In theory this is possible
that your network was just 'missed'. In this case it's usually enough to press the "Site Survey"
button again, or to refresh the webpage (F5) and press the "Site Survey" button again.
11. This manual is made for Windows users; can I also install the repeater with my iPad?
Yes, that is possible. Follow the below steps to setup the repeater with your iPad (or any other
tablet)
a. Plug the repeater into a wall socket on a location within the network range of the router.
b. Get your iPad/tablet and go to 'settings'
c. Have your iPad/tablet searching for wireless networks in range. It should find a network
named: ACT-WNP-RP-002.
d. Connect your iPad/tablet to this network. The password is 12348765.
e. When your iPad/tablet is connected to the repeater network, you can close the settings
screen of your iPad/Tablet.
f. Now open Safari/browser on your iPad/tablet and type 192.168.10.1 in the address field
(not in the Google search field)
g. A login screen will now appear. Login is 'admin' and password is also 'admin'.
h. The setup page of the repeater will now be opened.
i. Now follow the on-screen instructions and/or follow the remaining steps in this manual.
12. I have correctly setup the repeater, but I still want to login to the settings page to change
some details enabled the "Auto. Configure LAN IP address" option, but how do I find out
on which IP-address I can connect to my repeater?
For this, you need to login to your router. You can do this by typing the IP-address of your router in
your browser address field. This IP-address is usually printed on a sticker on the router itself. In
the router menu, you open the "DHCP client list". In this list you can see which devices are
currently connected to your router. Where to find and how to open this DHCP client list depends on
your router brand and model. Check the user manual from your router for assistance if needed.
The below example is from a Linksys router.
22