Blaupunkt IR 18e Bedienungsanleitung Seite 49

IR 18e
Operation
1. Switch on
Insert the power into the "DC" jack on the back of the radio and connect power
source, turn the power switch to ON position on the rear panel. The "BLAUPUNKT"
logo will appear on the screen after the product is connected with power. The radio
will automatically start searching for Wifi networks; please wait whilst this is
processing. When the search is complete, there will be a number of valid network
options shown on the LCD screen(If the network search has already been performed,
it will skip the network list interface and automatically select and enter the network
used last time), press UP or DOWN button to select network, press ENTER button to
confirm enter into this network. If this network has password request, then need
input password to successfully enter into this network.
How to input network password?
To input password, press UP or DOWN button to choose characters, press NEXT
button to move on to the next character, press PREV button to move back and
therefore delete character. Press ENTER to complete password entry. For the
characters types available for this unit, please refer to the end of this manual.

2. FM
When the unit is powered on, press the MENU button to enter the main menu,
choose FM, then press ENTER button into FM mode. You can also press the MODE
button to reach the FM function.

Manual scan: in FM mode, press UP button to radio station scan up or DOWN button
to radio station scan down. Press once will adjust the frequency 50KHZ per step.
Auto scan: in FM mode, press and hold NEXT button for roughly 2 seconds, to
autoscan forward. To autoscan backwards, press and hold PREV button. When the
radio detects a clear signal for a station, it will stop searching automatically and play.
In FM mode, press ENTER button, it will search full range stations and store stations
automatically. It can store up to 20 stations, you can get the preset number out by
pressing PRESET button.
49