Microsemi PDS-102GO/AC/M Benutzer Installationsanleitung Seite 11

Step 6: Connect "Uplink" jack (input) to the remote Ethernet network and "DATA PWR
OUT" jack (output) to the terminal.
Step 7: Verify connection to main AC power.
Notes:
• 3 ports RJ45 male plug waterproof connectors covers are supplied with the
PoE switch.
• AC in plug is supplied with the PoE switch.
• Ethernet cable and RJ45 male connectors are not supplied with the PoE
switch.
• For non AF/AT compliant unit - use a splitter; ensure splitter is connected
close to the terminal and not on the Switch.
• This unit is designed for outdoor use.
11