Isotek EVO3 GEMINI Installationsanleitung

EVO3 GEMINI
INSTALLATION INSTRUCTIONS

SAFETY FIRST
PLEASE READ THE FOLLOWING INSTRUCTIONS
BEFORE INSTALLATION
DO NOT expose this product to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed near the
apparatus. If liquid enters the chassis immediately unplug from
the wall socket.
DO NOT impede ventilation by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.;
DO NOT expose this product to naked flame sources, such as
lighted candles, these should not be placed near the apparatus;
MAKE SURE that this appliance (CLASS 1) is connected to a mains
outlet socket with protective earth.
PLEASE NOTE that the mains plug is used as the disconnect
device and must remain readily operable.
OUTPUT SOCKETS
ADDITIONAL INFORMATION ON FUSING AND RATINGS
A
The two output sockets marked 'A' are designed for use with
all electronic devices. These sockets are protected by a 10A
fuse (T10AH250) which can be located in the draw tray under
the IEC input.
The rated maximum total load for all two sockets together is
10A, 2300W.
A A
1