Isotek EVO3 VENUS Hinweise Zur Installation

EVO3 VENUS
INSTALLATION INSTRUCTIONS

SAFETY FIRST
PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE INSTALLATION
DO NOT expose this product to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed near the apparatus. If liquid enters the chassis immediately unplug from the wall socket.
DO NOT impede ventilation by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc.;
DO NOT expose this product to naked flame sources, such as lighted candles,
these should not be placed near the apparatus;
MAKE SURE that this appliance (CLASS 1) is connected to a mains outlet socket with protective earth.
PLEASE NOTE that the mains plug is used as the disconnect device and must remain readily operable.
OUTPUT SOCKETS
ADDITIONAL INFORMATION ON FUSING AND RATINGS
A
The five output sockets marked 'A' are designed for use with all electronic devices. These sockets are protected by a 10A
fuse (T10AH250) which can be located in the draw tray under the IEC input.
The rated maximum total load for all five sockets together is 10A, 2300W.
A
Max Total for all five sockets 10A 2300Watts
SERVICE & REPAIR
NO USER SERVICEABLE PARTS INSIDE
Should the unit fail, or cease to function, or function in a manner which seems unusual, please immediately turn off
and unplug from the mains supply.
Send an email to: support@isoteksystems.com
A A
A A