Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Warranty - Al-Ko Jet Stream M Bedienungsanleitung

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

Cleaning the electrodes
 Release and remove the suction head.
 Clean the electrodes.
 Insert and lock the suction head.

Troubleshooting

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note:In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
Suction turbine does not run
 Check cables, plugs, fuse, socket and
electrodes.
 Turn on the appliance.
Suction turbine turns off
 Empty the container.
Suction turbine does not start again
after the container has been emp-
 Turn off the appliance and wait for 5
seconds, turn it on again after 5 sec-
onds.
 Clean the electrodes as well as the
space between the electrodes.
Suction capacity decreases
 Remove blockages in the suction noz-
zle, suction tube, suction hose, or flat
pleated filter.
22
English
tied
 Replace the paper filter bag or the dust
disposal bag (special attachment).
 Ensure the filter cover properly locks
into place.
 Clean or replace the membrane filter
(special accessory).
 Replace the flat pleated filter.
Dust comes out while vacuuming
 Check for proper installation of the flat
pleated filter.
 Replace the flat pleated filter.
Automatic shut-off (wet vacuum
cleaning) does not react
 Clean the electrodes as well as the
space between the electrodes.
 Continuously check the filling level in
case of non-conductive liquid.
Automatic filter cleaning is not
working
 Suction hose is not connected.
Automatic filter cleaning cannot be
switched off
 Inform Customer Service
Automatic filter cleaning cannot be
switched on
 Inform Customer Service

Warranty

The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
Inhaltsverzeichnis
loading

Inhaltsverzeichnis