Specifications - SKYTRONIC 600.006 Gebrauchsanleitung

FRONT PANEL DESCRIPTION
1. FUNCTION / RANGE SWITH
This switch is used to select the functions and desired ranges as well as to
turn ON/OFF the meter.
To extend the life of the battery, the switch should be in the "OFF" position
when the meter is not in use.
2. DISPLAY
3 1/2 Digits LCD, Max. reading 1999
3. "COM" JACK
Plug in connector for black (negative) test lead.
4. "VΩmA" JACK
Plug in connector for red (positive) test lead for all voltage, resistance and
current (except 10A) measurements.
5. "10A"JACK
Plug in connector for red (Positive) test lead for 10A
measurement. There is no fuse in the built-in circuit for "10A"
jack. To use safely, each measurement can not last for more
than 10 seconds, and the interval between each measurement
must be more than 15 minutes.

SPECIFICATIONS

Accuracy is specified for a period of one year after calibration and at
18ºC~28ºC(64ºF~82ºF) with relative humidity up to 75%.
Accuracy specifications take the form of:
±([% of Reading]+[Number of Least Significant Digits])