Maintenance; General Description - SKYTRONIC 600.006 Gebrauchsanleitung

•
To avoid false readings, which could lead to possible electric shock
or personal injury, replace the batteries as soon as the low battery
indicator ("BAT" or "
CAUTION
To avoid possible damage to the meter or to the equipment under test,
follow these guidelines:
•
Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, diodes, or capacitance.
•
Use the proper terminals, function, and range for your
measurements.
•
Before measuring current, check the meter's fuses and turn power
OFF to the circuit before connecting the meter to the circuit.
•
Before rotating the range switch to change functions, disconnect
test leads from the circuit under test.
•
Before attempting to insert transistors for testing, always be sure
that the test leads have been disconnected from any measurement
circuits.
•
Remove test leads from the Meter before opening the Meter case.

MAINTENANCE

•
Before opening the case, always disconnect the test leads from all
live circuits.
•
For continue protection against fire, replace fuse only with the
specified voltage and current ratings: F 250mA / 250V (Fast Blown)
ø5 x 20
•
Periodically wipe the case with a damp cloth and mild detergent. Do
not use abrasives or solvents.

GENERAL DESCRIPTION

The multimeter is a pocket-sized 3 1/2-digit digital multimeter for measuring
DC and AC Voltage, DC Current, Resistance ,testing Diode , continuity and
hFE of transistor, and providing signal output. Overload protection and low
battery indication are provided.
") appears.