Hama 00053121-V2 Bedienungsanleitung Seite 7

Click Install.
Installation has been completed successfully.
Then click Finish.
Now install the USB 3.0 PCIe card as described in the
Installing the Hardware section. Next, start up the
computer. Windows detects the new device and
incorporates the driver that was installed into the system.
You can verify whether the PCIe card was successfully
installed by checking under Start (Windows logo) ->
Control Panel -> System and Maintenance ->
Device Manager. In some circumstances, you may be
asked by Windows User Account Control to allow this
action. Click Continue. The following entries must appear
without a yellow exclamation mark.
Universal Serial Bus controllers
• Renesas Electronics USB 3.0 Host Controller
• Renesas Electronics USB Root Hub
Installation on Windows XP with Service Pack 3
Requirements:
Ensure that your user account has administration
privileges for Windows XP, otherwise the driver
installation will not be successful. In addition, Service
Pack 3 from Microsoft must also be installed on your
computer in order to install and operate the USB 3.0
PCIe Card.
Before installing the PCIe card into your computer
(see the Installing the hardware section), you must first
install the required driver from the CD-ROM.
To do so, place the enclosed driver CD into your
computer's drive. The Hama installation program starts
automatically after a few moments. If the program does
not start, use the right mouse button to double click
autorun.exe in the main directory of the driver CD.
Select the appropriate language.
Click on Install Driver.
Note:
If you want to read the operating instructions in electronic
form, click Display Instructions. Please note that you must
have Adobe Acrobat Reader installed on your computer
to display the instructions. If this program has not been
installed, click Acrobat Reader to install the software
from the CD. Click Download driver to check to see if new
drivers for the product are available. Click Back to return
to language selection.
7