Connecting The Speakers - Cisco Linksys DMSPK50 Kurzanleitung

Connecting the Speakers

A.
Power off your Director (or other audio amplifier) .
B.
Locate the two-wire speaker cables provided . Each two-wire cable is
color coded with a
at both ends .
C.
Press down on the
input terminal on the back
of the speaker and insert the
speaker wire with the
D.
Press down on the black coded
input terminal on the back
of the speaker and insert the
speaker wire without a marking .
E.
Connect the other end of the
speaker wire with the
to the appropriate L (left) or
R (right) red
terminal on the Director .
F.
Connect the other end of the speaker wire without any marking to the
L (left) or R (right) black coded output that pairs up with the terminal
used in the previous step .
G.
Repeat steps C-F to connect the other speaker .
Stereo Speaker Kit
red
line on one of the wires, so it is easy to identify
red
coded
red
line .
red
line
coded output
3