Installation Overview - Cisco Linksys DMSPK50 Kurzanleitung

Installation Overview

This Quick Installation Guide will guide you through connecting each
two-wire cable to a speaker at one end, and your audio amplifier at the
other end . For each channel (Left and Right), you will connect the
coded input terminal on the speaker to the
the audio amplifier, and equivalently the black to the black .
To ensure proper operation and sound quality, the cables must be
connected to the speakers correctly . Do not allow any cable strands to
touch the other polarity or the rear panel of the amplifier . Make sure that
the speakers are connected to the correct Left and Right outputs .
NOTE:
If the colors are not matching at both ends, the speakers
will play out-of-phase, resulting in the reduction of dynamics and
bass and the elimination of the position of the music or vocals in
between the two speakers .
NOTE:
The speakers are interchangeable and can be used as either
the left or right speaker . The terminals and the cables are color
coded for correct polarity .
2
Connecting the Speakers to the Director
red
coded output terminal of
red
Stereo Speaker Kit