BeeWi BBZ201 Anleitungen Seite 8

8
3. USING THE CAR
3.1. Operation
Open the BeeWi Control Pad
application and display the
application menu using the
mobile Menu key then press
"Select Car" to see the list of
paired car.
Make sure your car is turned on
and select it in the list. The car
will be connected automatically
and the control screen below
displayed. By default the control
is done with the orientation
sensor and the car is parked (P
sign in red on the top left of the
screen).
Press P to exit the park mode
and start using the car.
- To move forward, move the Smart phone downwards
- To move backward, move the Smartphone upwards
- To turn left, turn the Smartphone leftwards
- To turn right, turn the Smartphone rightwards
You can also simply use the
buttons on the screen to control
the car. To do so, you need to
select a different controller as
described below.
ENGLISH