Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Brief
description
Swivel lock
Spindle lock
Direction of rotation arrow
Infinitely variable cutting width adjustment
17-60 mm. Cutting width adjustment 8-16 mm with
set of distance plates (special accessory).
Infinitely variable cutting depth adjustment with
movable supporting table.
Switch lock and stop lever
On/Off switch
No-load speed limit for low-noise operation
Additional side handle
Parallel guide
Depth gauge
Rolls
Suction cover
Protective cap
Modifications: Text, diagrams and data are correct at the time of printing. In the interest of continuous
improvement of our products, technical specifications are subject to alteration without prior notice.
8
ENGLISH
Switching on
and off
Dust extraction
Exchanging the
diamond cutting
discs
Suction adapter
Working tool
Disassembly
Quick break operation
Switching on:
Press switch lock and then on-off switch.
Switching off:
Release on-off switch.
Constant operation
Switching on:
Depress the switch lock and then the On/Off
switch. Release the On/Off switch, then re-
lease the switch lock.
Switching off:
Depress and release the On/Off switch.
Only use the machine with a suitable dust-remover!
Insert the suction hose connector into the
adapter until it sits firmly. Connect the other
end of the suction hose to a vacuum cleaner
which is suited for dust extraction.
Due to the high current at make the wall
chaser cannot be connected directly to the
socket at the vacuum cleaner. Do not switch
on the vacuum cleaner and the wall chaser
simultaneously!
Always disconnect the plug from the socket before carrying out any work on the
machine.
1. Put the machine on its side.
2. Loosen the screws and open and remove the protective cover. Move the protective
cover outwards (height gauge).
1
2
ENGLISH
9
Werbung
