Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Technical Data
Type
Capacity
Output
Power supply
Weight
Enclosure safety rating
Safety class
Display
Heating-up time to boiling
General Notes
Installation and commissioning may only be carried out by an approved technician. In addition
to the national legal requirements (in Germany: VDE 0100, DIN 1988 and DIN 44531), the
requirements of the local electricity and water companies must also be observed.
No modifications must be made to the appliance, its water connections and piping or the
electrical components.
Important: No fittings which restrict the flow of water such as hoses, diffusers and the
like may be attached to the water outlet.
Layout of Appliance (Fig. 1)
1
Lid
/
Grips
2
Water level indicator
3
Indicator lamp/ viewing window
4
Temperature control
5
Push button
6
Mixing unit
7
white = fill
8
red = hot water
9
blue = cold water
For fitting dimensions and dimensions of appliance, see Fig. 2 (dimensions shown in mm).
Preparing for Installation (Fig. 3)
The overflow pipe is integrated in the swivel spout. This means that the swivel spout (Fig. 1,
:), can reach temperatures of up to 100 °C. The water boiler must therefore be installed in
such a way that this component can not be touched accidentally.
When the water boils, steam escapes from the swivel spout!
For installation of the appliance, there must be a water connection with a ½" internal thread,
a 60° chamfer and a thread length of at least 15 mm (Figs. 3 and 4). There must also be a
properly fitted earthed power socket (Fig. 1). The power socket used must be of the correct
safety rating (IP 44).
8
t066a053-0402.p65
:
EKB 5 AS
:
5 litres
:
2 200 W
:
230 V AC
:
2.5 kg
:
I
:
IP 44 splash water proof
:
indicator lamp and buzzer
:
approx. 12.5 min
:
;
<
=
>
?
@
A
B
8
EKB 5 A
5 litres
2 000 W
230 V Ac
2.5 kg
I
indicator lamp
approx. 14.5 min
Swivel spout with built-in overflow pipe
Connector with isolating valve (Fig. 5)
Water sieve (Fig. 6)
Isolating valve (Fig. 5/6)
Sleeve nut ¾" (Fig. 6)
Flat gasket (Fig. 6)
Spacers (Fig. 5)
Screws and wall plugs (Fig. 5)
Lid retaining catch (Fig. 2)
15.04.02, 12:50
Werbung
